A Fireside company - serving Summerlin, NV

American Standard Heating & Furnace in Summerlin, NV

Furnace & heatingFurnace & heating
AC repairAC repair
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

American Standard Heating & Furnace in Summerlin: What to Know First

If your American Standard furnace won’t ignite, is short-cycling, or is blowing cold air, Fireside Heating & Air Co. Summerlin handles that repair as an independent American Standard service provider. Most furnace repairs in Summerlin are completed in a single visit, typically within a day or two of your call, and emergency no-heat calls get priority around the clock. Pricing is upfront and written before we start: furnace repairs here generally run $150 – $700, and the price quoted is the price paid.

Call (888) 325-9387

This page is for Summerlin homeowners who already own an American Standard system – a Silver or Gold series gas furnace, a Freedom 95, or an older Heritage unit still going strong – and who want it fixed correctly by someone who knows the brand. Call (888) 325-9387 and a live person answers, day or night.

How American Standard Products Fail – and How We Fix Them

American Standard furnaces are well-built, but they have specific wear patterns we see repeatedly in Summerlin homes. Knowing them shortens the diagnostic and gets you the right fix.

  • Hot-surface ignitors on Silver and Gold series furnaces. The silicon nitride ignitor is a common failure point, and the symptom is misleading: the draft inducer runs, you hear the system trying, but there’s no flame. Many homeowners assume the gas valve failed. Usually it’s the ignitor. We test it with a meter before replacing anything, and we use the OEM-style ignitor matched to your furnace rather than a universal one that runs hotter and fails sooner.
  • Flame sensors that get coated and cause short cycling. When a furnace fires, runs a few minutes, and shuts off before reaching temperature, a dirty or oxidized flame sensor is the usual cause. It’s a low-cost cleaning or replacement, not a control board. We see this often in Summerlin during the first cold snap each fall, after months of inactivity let the sensor film over.
  • Inducer motor and pressure switch faults on Freedom 95 and two-stage units. High-efficiency American Standard furnaces rely on a draft inducer to pull combustion air. Bearing wear or a clogged pressure port trips the switch and locks the furnace out. We check the port and tubing first, then the motor, so you don’t pay for a motor you didn’t need.
  • Heat exchanger cracks on older Heritage and pre-2010 furnaces. This is a safety issue and we treat it as one. A cracked heat exchanger can let carbon monoxide into your home’s air. We inspect it properly – with a camera where needed – and if it’s compromised we tell you plainly and talk through repair versus replacement. We never leave a furnace running on a cracked exchanger.
  • Gas valve and control board failures on aging units. These are less common but real on furnaces past 15 years. Before quoting a gas valve, we confirm gas pressure and confirm the board is sending the signal. In Summerlin’s dry climate, dust and insect intrusion into the control compartment occasionally cause board faults that a simple cleaning resolves.
Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Our American Standard Heating & Furnace Process

Here’s exactly what happens when you call us for an American Standard furnace in Summerlin.

  1. 1
    You reach a live person. No voicemail tree, no callback queue – day, night, weekend, or holiday. We ask what the furnace is doing and set a window we’ll keep.
  2. 2
    Full diagnostic on arrival. Our technicians are background-checked, uniformed, and trained across all nine major brands. They test ignition, flame sensor, inducer, pressure switch, gas pressure, and the heat exchanger before recommending anything.
  3. 3
    Parts decision, explained out loud. For American Standard we lean toward OEM or OEM-equivalent parts to protect the equipment and any remaining manufacturer warranty. If a quality aftermarket part is the smarter call, we tell you why and what it changes.
  4. 4
    The repair, done once. Most American Standard furnace repairs are finished in the same visit. Our technicians have up to 8 years of experience and carry shoe covers without being asked.
  5. 5
    We test it under load. The furnace runs through a full heating cycle and we confirm it reaches temperature and shuts off correctly before we leave.
  6. 6
    The 90-Day Done Right Promise. Every job is backed in writing for 90 days. If it isn’t done right, we make it right – no arguing, no paperwork chase.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What American Standard Heating & Furnace Costs in Summerlin

Straight pricing for the American Standard furnace work Summerlin homeowners call us for most:

  • Furnace repair: $150 – $700
  • Ignitor replacement: typically at the lower end of the repair range
  • Flame sensor clean or replace: a low-cost repair, usually same visit
  • Gas valve or control board repair: toward the top of the repair range, parts included
  • Heat exchanger inspection: included in the diagnostic
  • Seasonal tune-up: $80 – $200 (our $89 Seasonal Tune-Up is a standing offer)
  • Furnace replacement: quoted per home after a load review; a written fixed price before work begins

What moves the price: the part needed, whether it’s OEM, and how accessible the component is in your unit. We give you an upfront price before we touch anything. Current offers: $50 off any repair over $250, a free second opinion on any written estimate, and a permanent 5% senior and veteran discount. Call (888) 325-9387 – estimates are free.

Why Summerlin Homeowners Call Fireside Heating & Air Co. Summerlin for American Standard Work

We’ve served local communities for over 42 years, and most of our jobs are finished in a single visit. That longevity means our technicians have worked on American Standard systems through several generations of the brand, so the diagnosis is fast and the fix holds.

What sets us apart is how we work. A live person answers every call, around the clock – including the 2 a.m. no-heat emergency. Pricing is upfront: the price quoted is the price paid. Every job carries the 90-Day Done Right Promise in writing. And when a system needs attention we’re not the right fit for, our multi-brand training (Carrier, Trane, Lennox, and the rest of the nine major brands) means we can still help. We’re an independent American Standard service provider, not affiliated with or authorized by American Standard – but we know the equipment and we stand behind the work.

FAQs

Does repairing my American Standard furnace affect the manufacturer warranty?
Using OEM-equivalent parts and a qualified technician preserves your American Standard warranty. Installing mismatched aftermarket parts or a universal ignitor can void coverage, which is why we match parts to your model and document what we did.

Can you get American Standard parts for my furnace, and how fast?
Yes. Common American Standard furnace parts – ignitors, flame sensors, pressure switches, inducer motors – we source quickly, and most repairs are done in a single visit. If a part needs ordering, we tell you the timeline upfront.

Should I repair or replace my American Standard furnace?
Repair usually makes sense if the furnace is under about 15 years old and the fix is a single component. If the heat exchanger is cracked or repairs are stacking up, replacement is the honest answer. We’ll give you a written second opinion free if you have an estimate from another company.

How fast can you come out for a no-heat call in Summerlin?
No-heat calls get priority, and a live person answers when you call (888) 325-9387 – including nights and weekends. Most Summerlin furnace calls are handled within a day or two, with emergencies moved to the front.

Is a cracked heat exchanger really dangerous?
Yes – it can allow carbon monoxide into your home’s air, and we treat it as a safety issue. We inspect it properly and will not leave a furnace running on a compromised exchanger. If that’s what we find, we’ll talk through your options plainly.

Do you service other furnace brands too?
Yes – we’re trained on all nine major brands, including Carrier, Trane, and Lennox, so we can help regardless of what’s in your home.

Ready to get your American Standard furnace handled right? Call (888) 325-9387 for a free estimate. A live person answers, and the price quoted is the price paid.

Written by the team at Fireside Heating & Air Co. Summerlin, serving Summerlin and nearby areas.

Need HVAC help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (888) 325-9387
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Fireside Heating & Air Co. Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch